Code 11; Enable/Disable Code 11 - Symbol SE955 Integration Manual

Code 11

Enable/Disable Code 11

Parameter # 0x0A
To enable or disable Code 11, scan the appropriate bar code below.
Set Lengths for Code 11
Parameter # L1 = 0x1C, L2 = 0x1D
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range.
• One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length. Select the length
using the numeric bar codes beginning on
Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan the
Cancel bar code on
• Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected lengths.
Select lengths using the numeric bar codes beginning on
containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct
an error or to change the selection, scan the
• Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. Select lengths
using numeric bar codes beginning on
12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be
preceded by a leading zero). To correct an error or change the selection, scan
• Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the scan engine
capability.
*
page 8-73. For example, to decode only Code 11 symbols with 14 characters, scan
page 8-74.
Cancel
page 8-73.
Enable Code 11
(0x01)
Disable Code 11
(0x00)
page 8-73. For example, to decode only those Code 11 symbols
bar code on page 8-74.
For example, to decode Code 11 symbols containing between 4 and
Parameter Menus 8-41
theCancel bar code on page 8-74.