Ups Special Services; Usps Keypad Operation - Detecto MS 15 Operation Manual

UPS SPECIAL SERVICES

After pressing one of the mode keys previously described special services offered by UPS may then
be selected. The following describes the special service keys:
DECL VALUE - This key selects Declared Value, UPS's Package Insurance. Pressing this key will
cause the display to request the declared value dollar amount. The operator should then enter the
declared value using the numeric keys followed by pressing the ENTER key. The system will
calculate and momentarily display the declared value fee. The fee is then added to the current
shipping charges and the total displayed on the display line. The Declared Value service may be
turned off by pressing the key a second time. The LED key indicator is illuminated when declared
value service is selected.
AOD - Pressing this key selects Delivery Confirmation Response special service. The SIGNATURE
REQ'D? prompt is displayed and when "1" for YES or "0" for NO is selected, the next prompt,
REPLAY ADDRESS? is displayed. When "1" for YES or "0" for NO is selected, the fee will be
displayed for a moment, then added to the current shipping charges and the total rate displayed. To
cancel the Delivery Conformation Response service, press the AOD key again.
OVERSIZE - This key selects the Oversize Package rate for UPS Ground and 3 Day Select and is
used to calculate dimensional weight for UPS Next Day and Second Day Air Services. This key is
also used for the non-standard surcharge on USPS First Class.
ADDITIONAL HANDING - Press the red SPEC key to add the UPS additional handling charge to the
displayed shipping rate.

USPS KEYPAD OPERATION

This section describes the use of the keys
contained in the US Postal Service
(USPS) section of the keypad. Refer to
above layout or to the actual keypad for
the layout of these keys.
1ST/PRIOR - This key selects the First
Class or Priority Mail service. The system
automatically changes from First Class to
Priority Mail when the weight exceeds the
limit for First Class. The LED key indicator
is illuminated when 1st/PRIOR service is
selected.
3RD/PCR PST - This key selects the Third Class or Parcel Post (Fourth Class) service. System
selects the Third Class rate unless the weight of the item exceeds the Third Class limit. In this
instance the Fourth Class or Parcel Post rate will be selected automatically. If the weight is within the
range where either Third Class or Parcel Post could be used, the display will prompt:
Press "1" for the Fourth Class rate or press "0" for the Third Class rate. Note: When calculating Fourth
Class rates, the scale automatically calculates the BMC discounted rate for qualifying ZIP codes. To
calculate the non-discounted rate enter the destination zone number. For "Local" use zone 0. The
LED key indicator is illuminated when 3rd/PCR PST service is selected.
EXP PO-PO - This key selects Express Mail Post Office to Post Office service. The LED key indicator
is illuminated when EXP PO-PO service is selected.
EXP PO-AD - This key selects Express Mail Post Office to Addressee service. The LED key indicator
is illuminated when EXP PO-AD service is selected.
1st 3 rd
PRIOR PCR-PST
1st
PS
CERT
ZIP+ 4
RET
SPEC
RECPT
USE 4TH CLASS? (1/0)
7
USPS
EXP EXP INTL
PO-PO PO-AD
AIR
INTL
REGIS
INS
SURF
BND
LIBRAY BOOK PRNT
MTR
USPS Keypad Layout