Table of Contents
Advertisement
Battery installation
1. Standing on the left side of the Express, insert the
mushroom-shaped head of the battery locking pin into the
hole in the battery handle.
Locking pin
2. Pivot the battery so it is parallel with the bike inside the
frame triangle, letting the weight of the battery rest on the
bike frame.
3. Push the battery rearward into the motor plate as far
back as it is able to go. By looking between the motor plate
and the battery, you should be able to see if the battery is
fully connected.
Push
8
Advertisement
Table of Contents
Need help?
Do you have a question about the IZIP EXPRESS and is the answer not in the manual?