Table of Contents
Advertisement
38 Preference Settings
4.2.5 Audio mode
4.3 Local time setting
device since the digital receiver is just a bypass for the video
recorder.
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and the
other is a decoded signal. If you have the digital receiver linked
to your audio-video receiver via the S/PDIF output, you have
to set the Dolby Digital option to PCM, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to Multi-channel, then the digital receiver will
output decoded Dolby Digital audio, scaling it down to two
channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
You should set your local time for timer events. If you do
not set the local time correctly, the programme time table pro-
vided by the programme guide may be distrustful. For the pro-
gramme guide, refer to §5.3.
§5.2.4
for a detailed description.
Advertisement
Table of Contents
