Table of Contents
Advertisement
NOTE
Illustrations in this manual may differ from the actual prod-
uct.
To use the SCART output
If you connect with a standard SCART cable, you do not have
to make audio connection because it can output stereo audio
as well. But if you use a conversion cable such as SCART-to-
Component, then you have to make audio connection.
NOTE
You cannot view high definition video by means of the
SCART output.
To use the Component video output
Y
P b
P r
NOTE
When connecting with the Component video cable, remem-
ber to also plug in the additional white and red audio cables
2.4 Connecting up your digital receiver 15
For best results with a standard television set,
you should use a SCART cable. Plug one end
of the cable into the TV socket on the digital
receiver, and plug the other end into a free
SCART socket on your television.
You need to obtain a Component video ca-
ble (RCA cable) to use the Component video
output. Plug one ends of the cable into the Y
(green), Pb (blue) and Pr (red) sockets on the
digital receiver, and plug the other ends into
the matching sockets on your television.
2
Advertisement
Table of Contents
