Table of Contents
Advertisement
16 Setup
To use the Composite video output
To make the audio connection
from the digital receiver to the back of your television.
When an HDMI cable is connected, component output be-
comes disabled. If you want to output component video, do
not have the HDMI cable and component cable connected at
the same time, and make sure to disconnect the HDMI cable.
You need to obtain a Composite video cable
(RCA cable) to use the Composite video out-
put. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket
on your television.
NOTE
You cannot view high definition video by means of the Com-
posite video output.
You need to obtain an audio cable (RCA ca-
ble) to link the audio connectors. Plug one
ends of the cable into the AUDIO L (white)
and AUDIO R (red) sockets on the digi-
tal receiver, and plug the other ends into
the matching sockets on your television or
audio-video receiver.
Advertisement
Table of Contents
