Table of Contents
Advertisement
22 Service Search
Configuring Unicable settings
Set the DiSEqC 1.0 option and the DiSEqC 1.1 option accord-
ing to your antenna configuration.
For example, to select the antenna con-
nected to the A5 input in the left figure, set
the DiSEqC 1.1 option to 2 of 4 and the DiS-
EqC 1.0 option to 1 of 4. If you have a mini
DiSEqC 1.0 switch which has only two in-
puts, you should set the DiSEqC 1.0 option
to Mini A instead of 1 of 4.
Single Cable Distribution (SCD)
is a satellite television technol-
ogy that enables the delivery of
broadcast programming to multi-
ple users over a single coaxial ca-
ble. If you have a SCD switch,
which is represendted by Unica-
ble, enter into the Unicable Set-
ting submenu to set the options for
yours.
Set the User Band item to any
available other than Disable, and
set the Band Frequency item any
available for your SCD switch. If
you have two LNBs linked to the
SCD switch, you should also set
the Satellite Position item prop-
erly.
manual of your SCD switch.
For details, refer to the
Advertisement
Table of Contents
