Searching For Services - Topfield SRP-2401CIplus User Manual

To get every satellite position calculated, take the following
steps:

3.1.4 Searching for services

There are in general four service search methods:
3.1 Searching for broadcasting services 25
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Select the tuner that is connected to the motorized an-
tenna at the Tuner Select option.
3. Enter your location to the My Longitude option and the
My Latitude option with the
4. Enter the position of your selected satellite to the Satellite
Angle option if it is not correct.
5. Select the Goto the position option, then the antenna will
turn toward your selected satellite as calculating its po-
sition.
6. If the receiving quality, which is displayed at the bottom
right of the screen, is not good, then tune the antenna
finely with the Move option. The changed position is
automatically saved. At this time you had better check
the receiving quality of every transponder and choose
the best one at the Transponder (or Frequency) option.
It will be helpful to your fine tuning.
> @
, and numeric buttons.
To perform a service search, se-
lect the Installation > Searching
menu. You should see a screen
like the left figure.
3