Table of Contents
Advertisement
After connecting up the digital receiver, you will need to per-
form a service search.
NOTE
If there is no service stored, you will be not able to access all
menus. A is another name for a .
3.1 Searching for broadcasting services
This digital receiver can be operated with both fixed antenna
and motorized antenna. You have to configure antenna set-
tings according to your antenna system in the following order:
1. Configure LNB settings. Refer to §3.1.1.
2. Set the position of your desired satellites if you have a
motorized antenna. You can control the antenna in DiS-
EqC 1.2 mode or USALS mode. Refer to
EqC 1.2, and refer to
3. Perform a service search.
Chapter 3
Service Search
§3.1.3
for USALS.
19
§3.1.2
for DiS-
3
Advertisement
Table of Contents
