General Lock CX480-DN User Manual And Installation Instructions page 20

SHARPNESS G
7.
This parameter, range from 0~15, is for you
to adjust sharpness gain control.
The default SHARPNESS G setting is 10.
Item 4-7 is for you to obtain much sharper
pictures.
• VIDEO SETUP2
VIDEO SETUP2
Y GAMMA
Y KNEE
C GAMMA
C KNEE
PATTERN
EXIT
03
00
04
07
1. Y GAMMA
This parameter, range from 0~7, is for you
to adjust the Y Gamma Correction Curve.
The default Y GAMMA setting is 03.
2. Y KNEE
This parameter, range from 0~7, is for you
to adjust the Y Gamma Correction Knee.
The default Y KNEE setting is 00
3. C GAMMA
This parameter, range from 0~7 is for you
to adjust the C Gamma Correction Curve.
The default C GAMMA setting is 04.
4. C KNEE
This parameter, range from 0~7 is for you
to adjust the C Gamma Correction Knee.
The default C KNEE setting is 07.
5. PATTERN
Press or to select the patter output
from the camera. The list of pattern that
can be output by the PG is shown in Table
below: