Table of Contents
Advertisement
1. Connect the video output of the camera to a color monitor or other video device
through a 75 ohm type coaxial cable with BNC female connector at camera end.
2.
Plug the power cord to the electrical outlet 90~265VAC. Power LED indicates red light
if the power source is properly connected.
3.
Connect the AC 24V or DC 12V power source to the power input terminals. The power
supply connection is illustrated below. Please note that the screw marked ( GND)
should connect to the camera case. Power LED indicates red light if the power source
is properly connected.
DC 12V Adapter
Connections
AC24V/DC12V
+
AC 24V Adapter
+
AC24V/DC12V
+
Advertisement
Table of Contents
