DCB-480V Users Manual and Installation Instructions
DCW/B-480V Camera Users Manual and
Installation Instructions
Safety Warning
1. Do not expose the camera to humidity and dust.
Moisture can damage the camera and cause the danger of electric shock. If the
camera is mounted outdoors, a camera housing is required. Do not install the
camera at where there is greasy smoke or steam, where the humidity is too high, or
where there is a lot of dust to prevent damages to the camera.
2. Do not disassemble the camera.
Do not disassemble the camera body as it is dangerous and may cause the
damages to the camera. Refer all servicing to qualified service personnel.
3. Handle the camera with care.
Be careful when handling the camera, do not drop it or subject it too strong shock or
vibration to prevent any damages to it.
4. Do not install the camera near electric or magnetic fields.
Installed the camera away from TV, radio transmitter, magnet, electric motor,
transformer, audio speakers because the magnetic fields generate from above
devices will distort the video image.
5. Do not install the camera in the high temperature environment.
Installed the camera away from stoves, or other heat generating devices, or where it
could be subject to direct sunlight as the high temperatures could cause
deformation, discoloration or other damages of the camera. Install the camera at
where the temperature range will stay between 0℃ to 50℃ (32. to 122.).
6. Cleaning
Use a soft cloth to remove the dirt from the unit. Use lens tissue or a cotton tipped
.
applicator and ethanol to clean the camera lens