Table of Contents
Advertisement
←Video Output Connector
This connector is used to connect with the VIDEO IN
connector of the monitor (Video Out: BNC type).
↑ Power LED Indicator
This indicator lights comes on when the power of this camera
is on.
→ Tact Switcher for Setting
Press the tact switcher to display the setting menu. It is used
to activate an item selected in the SET UP menu.
↓ Tact Switcher for Right Cursor
This tact switcher is used to move the cursor to the right and
increase the parameters of the selected item.
° Tact Switcher for Down Cursor
This tact switcher is used to move the cursor downward for
selecting the items in the screen menu.
± Tact Switcher for Left Cursor
This tact switcher is used to move the cursor to the left and
decrease the parameters of the selected item.
" Tact Switcher for Up Cursor
This tact switcher is used to move the cursor
upward for selecting the items in the menu.
≥ S-Video / RS-232 port
Connecting Mini Dim Male Connector
to S-Video / RS-232 port for better
video output quality or communication.
× Ground Connector
Connecting to power system ground.
∝ Auto Iris Lens Connector
This connector is used to connect with the auto iris lens by a
4-pin male connector.
Video Drive +12V GND VD-IRIS GND
Direct Drive Cnt-
V/D Switch
11
Switch for Video Drive Auto IRIS lens or
Direct Drive Auto IRIS lens.
Line in power cord
12
This power cord is for 90 ~ 265 VAC power supply.
AC24V/DC12V Compatible Input Terminal
13
This power terminal is for connecting the 24V AC or 12V
DC power supply cord.
Audio Output Connector
14
This connector is used to connect with an audio device
(Audio Out: RCA connector).
RX
GND
TX
5V
Y GND
Y
C
C GND
Pin 1
Pin 2
Pin 3
Cnt+
Drv+
Drv-
Pin 4
3
4
1
2
V
D
Advertisement
Table of Contents
