Table of Contents
Advertisement
3. When the setting is off, it is only a color
CCD camera.
The default DAY/NIGHT setting is ON.
• D/N SW LVL
This parameter, range from 00~99, is to
adjust the day/night switch level. When the
value is higher, it will be much more easier to
switch Color and Black/White automatically,
and vice versa.
The default D/N SWLVL setting is 50.
• CAMERA ID
1. Press
or
to change the character
of CAMERA ID.
camera identification (CAMERA ID) to
assign a name to each camera when you
set the CAMERA ID ON.
The camera ID is up to 9 characters. The
2.
characters for setting the ID of the camera
You can use the
are: "Space", "0~9", "A~Z", "a~z".
Press
to start editing camera ID and
SET
then press
or
necessary character then move
to change the cursor to another position.
After ID setting finished, press
to return to main menu.
The default CAMERA ID setting is ON.
SWITCH SETUP
EXPOSURE
ES
LINELOCK
ON
AWB
ON
DAY/NIGHT
ON
CAMERA ID
ON
LOAD DEFAULT
EXIT
• LOAD DEFAULT
Press
to reset all parameters of the
SET
camera to the factory settings.
to select the
or
again
SET
Advertisement
Table of Contents
