Time Setting; Temperature Setting; Copy Function - Polypipe Touch Screen Programmable Room Thermostat Installation & User Manual

Time Setting

a) Press the key to flash the following in order:
Year, Month, Day, Hour, Minute.
Use the + or – key to adjust each
b) Press OK when complete to confirm exit
Note: The internal calendar will calculate the correct day of the
week (1=Monday etc.)
Note: The time with change automatically to adjust BST and
GMT on the correct date.

Temperature Setting

There are 3 temperature settings available:
Comfort used when room is permanently occupied e.g. 21°C
Economy used when room is temporarily occupied e.g. 18°C
Night used when the room is unoccupied e.g. 15°C
a) Press the key to flash the following in order:
Comfort, Economy, Night. Use the + or – key to adjust each
b) Press OK when complete to confirm exit.
Mode Setting
a) Press the key to select the following:
Automatic (programme mode). The display will also show the
current temperature at that time e.g.
Continuous operating at comfort temperature
Continuous operating at economy temperature
Continuous operating at night temperature
Continuous operating at frost protection setting (+7°C)
Quick Set Up
To enable quick set up of the Thermostat, there is a pre-
installed programme. Simply enter the year, date and time.
Then switch to Auto.
The programme for each day will be as follows:
6.00 a.m. - 8.00 a.m. Comfort setting
8.00 a.m. - 6.00 p.m. Economy setting
6.00 p.m. - 11.00 a.m. Comfort setting
11.00 a.m. - 8.00 a.m. Night setting
To change any of the temperatures for these times see
Temperature Setting Instructions. To enter different heating
times for each day proceed to Programme Setting Instructions.
Programme Setting
There are three different kinds of programme during the
automatic mode. That is: Daily programme (different
programme for each day of a week), 5/2 programme (the
same programme for Monday (1) - Friday (2) and the same
programme for Saturday (6) - Sunday (7)), Weekly programme
(the same programme for each day of a week).
Daily Programme
a) Press and hold
b) Press + or – key to set the day which you want to programme
c) After setting the day/days, press
d) Press
e) Press + or – key to adjust time. Repeat step d) and e) if you
f) When you finish setting one day programme,
g) Set the rest days' programme of a week as above operation
5/2 Programme
a) Press and hold
b) Press + or – key to select days from 1 to 5 (these days are
c) Set the programme for Monday-Friday and Saturday-Sunday
Weekly Programme
a) Press and hold
b) Press the + or – key to select days from 1 to 5 (these days
c) Set the programme by using the same method as Daily

Copy Function

or
a) Press and hold
b) Press the + or – key to choose the programme of target day
c) Press the
d) Press + or – key to choose the day which you want to copy
e) Press the
f) In the same way to copy and download programme to the
Set at 21°C
Set at 18°C
Set at 21°C
Set at 15°C
4
key for 3 seconds to flash the day (1-7)
and the corresponding bar dot for programme is flashing
key to enter into energy saving mode; press key to
enter into comfort (sun) mode; press
(moon) mode
want to change the programmed level temperature
press to flash day
from step b) to step f), after finishing all settings, press OK to
confirm and exit, or exit automatically in 1 minute (after 15
seconds the display will switch off).
key for 3 seconds to flash date
flashing)
by using the same way as Daily Programme A operation
key for 3 seconds to flash date
are flashing)
Programme operation.
key for 3 seconds to flash day and enter into
COPY mode when you are in automatic mode
and COPY are flashing
which you want to copy from
key again to stop flashing COPY (the programme
is memorised
the programme to
key again, the programme has been downloaded
rest days, after finishing all programmes, press OK to confirm
and exit, or exit automatically in 1 minute (after 15 seconds
the display will switch off).
key to flash time 0:00
key to enter into night
The day