Alarm Setting; Low Battery Indicator - Polypipe Touch Screen Programmable Room Thermostat Installation & User Manual

Manual Override
Function
During the automatic mode
override function
Temporary override (Party)
a) Press + or – key to adjust override temperature: the symbol
indicator will appear on the display
b) After setting the temperature, press OK key to confirm and
exit, or exit automatically in 1 minute (after 15 seconds the
display will switch off). The manual setting temperature and
will be kept until entering next setting programme or
when pressing OK key
Hold hours
a) Press + or – key to adjust override temperature: the symbol
indicator will appear on the display
b) Press key once to display 1H and
c) Press + or – key to set holding time from 1 hour to 24 hours
d) Press OK key to confirm and exit, or exit automatically in
1 minute (after 15 seconds the display will switch off).
The number of hours and the override temperature are
flashing alternately on the top right side of the display.
Press OK to exit from the override function.
Hold Days (Holiday)
a) Press + or – key to adjust override temperature: the symbol
indicator will appear on the display
b) Press key twice to display 1d and
c) Press OK key to confirm and exit, or exit automatically
in 1 minute (after 15 seconds the display will switch off).
The number of hours and the override temperature are
flashing alternatively on the top right side of the display.
Press OK for exit from the override function.
Hold Long Period Running
a) Press + or – key to adjust override temperature: the symbol
indicator will appear on the display
b) Press key three times and will display
c) Press OK key to confirm and exit, or exit automatically
in 1 minute (after 15 seconds the display will switch off).
The temperature will be kept until manually pressing OK key.
you can have the
indicator
indicator

Alarm Setting

a) Press and hold key for 3 seconds to display AL
b) Then press key once to display
Press + or – key to select the days (1-5, 6-7, 1-7)
c) Press key once to flash hour. Press + or – key to set hours
of alarm clock
d) Press key once again to flash minute. Press + or – key
to set minutes of alarm clock
e) Press OK to confirm. After finishing the setting time, buzzer
ring BI-BI for 30 seconds to the programmed time. Press OK
key to turn off the alarm clock in the midway.
To Cancel Alarm
a) Press and hold key for 3 seconds to display
b) Then press and will disappear, press OK key to confirm
and cancel alarm or exit automatically (after 15 seconds the
display will switch off).

Low Battery Indicator

When low battery occurs the
display. Change the batteries in a few minutes and the
programme, temperatures and date setting will remain in
memory, you only need to reset the time clock (hours and
minutes)
Key Lockout Function
Hold OK key for 3 seconds to display OK only, all keys will be
locked out. To unlock the keys, hold the OK key for 3 seconds
to restore the display of the keys. Use this function when for
example you need to clean the display.
5
on the top left.
symbol will appear on the