Table of Contents
Advertisement
Quick Links
www.proform.com
USERʼS MANUAL
Model No. PFTL59008.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are missing, DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
1-888-533-1333
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pro-Form PFTL59008.0
Summary of Contents for Pro-Form PFTL59008.0
- Page 1 USERʼS MANUAL Model No. PFTL59008.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and switch the reset/off cir- cuit breaker to the off position when the Always unplug the power treadmill is not in use.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ual. To help us assist you, note the product model ® 570 CROSSWALK treadmill. The 570 CROSSWALK number and serial number before contacting us. The treadmill offers an impressive selection of features de- model number and the location of the serial number signed to make your workouts at home more enjoyable decal are shown on the front cover of this manual. -
Page 6: Assembly
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. -
Page 7: Upright Spacer (100), Which Are Marked With
1. Make sure that the power cord is unplugged. Hole With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (48) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Wire Harness (91) to the Base (96). - Page 8 4. Hold a Bolt Spacer (95) inside the lower end of the Right Upright (92). Insert a 3/8" x 4" Bolt (8) with a 3/8" Star Washer (11) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (95), 3/8" x 4" Bolt (8), and 3/8"...
- Page 9 6. Hold a Bolt Spacer (95) inside the lower end of the Left Upright (77). Insert a 3/8" x 4" Bolt (8) with a 3/8" Star Washer (11) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (95), 3/8" x 4" Bolt (8), and 3/8"...
- Page 10 9. Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two #8 x 3/4" Screws (1). Lift off the Pulse Bar (110). Save the Pulse Bar and the two Screws for assembly steps 10 and 12.
- Page 11 12. Set the console assembly on the Left and Right Uprights (77, 92). Be careful not to pinch any Console Assembly wires. Attach the console assembly to the Pulse Bar (110) with six #8 x 3/4" Screws (1). Start all six Screws before firmly tightening any of them.
- Page 12 15. Remove the Resistance Knob (88) from a resis- tance assembly. Make sure that the 3/8" x 4 3/4" Bolt (90) stays inside of the resistance assembly and that the resistance assembly does not come apart. Note: See the lower Large drawing to reassemble the resistance assembly Holes...
- Page 13 17. Raise the Frame (48) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (45) so that the large barrel and the Latch Knob (46) are in the posi- tions shown.
-
Page 14: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with high- performance lubricant. - Page 15 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE see page 18. To use the information mode, see page 19. The treadmill console offers a selection of features de- IMPORTANT: If there is a sheet of clear plastic on signed to make your workouts more effective. When the console, remove the plastic.
- Page 16 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
- Page 17 5. Follow your progress with the displays. 6. Measure your heart rate if desired. When the Before using the manual mode handgrip pulse is selected, sensor, remove the upper half the sheets of Track of the display clear plastic from can show a the metal con- track that represents 1/4 mile (400 meters).
- Page 18 HOW TO USE A PRESET WORKOUT If you have selected workout 13, 14, or 15, you will be prompted to use the crosswalk arms. When the 1. Insert the key into the console. words START CROSSWALK flash in the display, move the crosswalk arms forward and backward as See HOW TO TURN ON THE POWER on page 16.
- Page 19 THE INFORMATION MODE HOW TO USE THE CROSSWALK ARMS The console features an information mode that keeps As you walk on the treadmill, you can hold the track of treadmill usage information. The information handrails or use the crosswalk arms. To exercise your mode also allows you to select miles or kilometers as arms, shoulders, and back for a total body workout, the unit of measurement and to turn on and turn off the...
-
Page 20: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. - Page 21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left.
-
Page 22: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 23 Remove the three #8 x 3/4" Screws (1) and care- fully pivot the Motor Hood (58) off. Locate the Reed Switch (65) and the Magnet (40) on the left side of the Pulley (41). Turn the Pulley until the Magnet is aligned with the Reed Switch. 1/8 in.
- Page 24 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn;...
-
Page 25: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 26: Part List
PART LIST—Model No. PFTL59008.0 R0109A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Idler Roller Ground Wire #8 x 1/2" Screw Hex Key #8 x 1 1/2"... - Page 27 Key No. Qty. Description Key No. Qty. Description Caution Decal Pulse Bar Incline Motor Incline Motor Wire Incline Motor Spacer #8 x 1/2" Console Ground Screw Console Fan – 8" Blue Wire, M/F Console – 10" Blue Wire, 2F Key/Clip –...
-
Page 28: Exploded Drawing
EXPLODED DRAWING A—Model No. PFTL59008.0 R0109A... - Page 29 EXPLODED DRAWING B—Model No. PFTL59008.0 R0109A...
- Page 30 EXPLODED DRAWING C—Model No. PFTL59008.0 R0109A...
- Page 31 EXPLODED DRAWING D—Model No. PFTL59008.0 R0109A...
-
Page 32: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the PFTL59008.0 and is the answer not in the manual?
Questions and answers
Belt not moving I have a pro form carbon tl what can we do the incline goes up and down and when push button it beeps