Specifications - Yaesu FT-2900E Operating Manual

S
PECIFICATIONS
General
Frequency Range:
Channel Step:
Standard Repeater Shift:
Frequency Stability:
Modes of Emission:
Antenna Impedance:
Supply voltage:
Current Consumption (typical): Rx: less than 0.7 A, less than 0.3 A (squelched)
Operating Temperature Range: –20° C to +60° C
Case Size (WxHxD):
Weight (Approx.):
Transmitter
Output Power:
Modulation Type:
Maximum Deviation:
Spurious Radiation:
Microphone Impedance:
Receiver
Circuit Type:
Ifs:
Sensitivity (for 12dB SINAD):
Selectivity (–6/–60dB):
IF Rejection:
Image Rejection:
Maximum AF Output:
Specifications subject to change without notice or obligation. Specifications guaranteed
only within Amateur band.
Frequency ranges will vary according to transceiver version; check with your dealer.
2
Tx 144 - 146 MHz
Rx 144 - 146 MHz or 136 - 174 MHz
5/10/12.5/15/20/25/50/100 kHz
±600 kHz
Better than ±10 ppm (–20 °C to +60 °C)
F2D/F3E
50 Ohms, unbalanced
13.8 V DC ±15 %, negative ground
Tx: 15 A (75 W) /9 A (30 W) /5 A (10 W) /4 A (5 W)
160 x 50 x 185 mm (w/o knobs)
1.9 kg
75 W/30 W/10 W/5 W
Variable Reactance
±5 kHz (Wide)
±2.5 kHz (Narrow)
Better than –60 dB
2 k-Ohms
Double Conversion Superheterodyne
21.7 MHz & 450 kHz
Better than 0.4 μV
12 kHz/28 kHz (Wide)
9 kHz/22 kHz (Narrow)
Better than 70 dB
Better than 70 dB
3 W into 4 Ohms @10 % THD
FT-2900E O M
PERATING ANUAL