Yaesu FT-2900E Operating Manual page 35

8. If you wish to store another DTMF string, repeat steps 2 through 6 above.
9. Press and hold in the [ MHz ( SET )] key for one second to save the new setting and exit
to normal operation.
To transmit the memorized telephone number, use the following procedure:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "17 DT A
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
set this Set Mode Item to "AUTO
3. Press and hold in the [ MHz ( SET )] key for one second to
save the new setting and exit to normal operation.
4. In the Autodialer mode, which you just engaged, first press the PTT switch, then press
the microphone's numeric key ( [ 0 ] through [ 9 ] ) corresponding to the DTMF memory
string you wish to send. Once the string begins, you may release the PTT switch, as the
transmitter will be held "on the air" until the DTMF string is completed.
While the DTMF Autodialer is activated, the " " icon will
appear on the LCD.
To disable the Autodialer function mode, select "MANUAL
The speed at which the DTMF digits are sent can be changed. Two speed levels are avail-
able: Low (10 digits per second) and High (20 digits per second: default). To toggle be-
tween Low and High speed, use the following procedure:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "20 DT SPD
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select the desired speed ("50
speed).
3. Press and hold in the [ MHz ( SET )] key for one second to save the new setting and exit
to normal operation.
You can also set a longer delay between the time your transmitter is keyed and the first
DTMF digit is sent. To set the delay time, use the following procedure:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "18 DT DLY
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select the desired speed (50
3. Press and hold in the [ MHz ( SET )] key for one second to
save the new setting and exit to normal operation.
FT-2900E O
PERATING
DTMF A
UTODIALER
17 DT A/M M M M M ."
17 DT A 17 DT A
17 DT A
AUTO." AUTO AUTO
AUTO
20 DT SPD 20 DT SPD
20 DT SPD." 20 DT SPD
50": High speed or "100
50 50
50
18 DT DLY 18 DT DLY 18 DT DLY." 18 DT DLY
50 50 50 50/250 250 250 250/450 250 450 450 450/750 450 750/1000 750 750 750
M
ANUAL
DTMF O
MANUAL" in step 2 above.
MANUAL MANUAL
MANUAL
100": Low
100 100
100
1000 ms).
1000 1000 1000
PERATION
31