Set" (Menu) Mode - Yaesu FT-2900E Operating Manual

" ( M
"S
ET
1 APO
Function: Enables/Disables the Automatic Power Off feature.
Available Values: 30MIN / 1HOUR / 3HOUR / 5HOUR / 8HOUR / OFF
Default: OFF
2 AR BEP
Function: Selects the Beep option during ARTS operation.
Available Values: IN RNG / ALWAYS / OFF
Default:IN RNG
IN RNG: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other station
(every 15 or 25 seconds when in range).
OFF: No alert beeps sound.
3 AR INT
Function: Selects the Polling Interval during ARTS operation.
Available Values: 25SEC / 15SEC
Default: 25SEC
4 ARS
Function: Activates/Deactivates the Automatic Repeater Shift feature.
Available Values: ON / OFF
Default: ON
5 BCLO
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON / OFF
Default: OFF
6 BEEP
Function: Enables/Disables the key beeper.
Available Values: KY+SCN / KEY / OFF
Default: KY+SCN
KY+SC: The beeper sounds when you press any key, or when the scanner stops.
KEY: The beeper sounds when you press any key.
OFF: Beeper is disabled.
7 BELL
Function: Selects the CTCSS/DCS/EPCS Bell Ringer repetitions.
Available Values: 1 / 3 / 5 / 8 / CNTNUE (Continuous ringing) / OFF
Default: OFF
72
) M
ENU ODE
M S
ENU ELECTION
D
ETAILS
FT-2900E O
PERATING
M
ANUAL