Using With A Bluetooth Phone; To Connect To A New Phone - Harman Kardon GPS-810NA Quick Start Manual

Using With a Bluetooth Phone

Your GPS-810 has calling features that can be used with a Bluetooth-
enabled phone. Before using the GPS-810's phone features, please read
the instructions for your particular Bluetooth phone.
NOTE: The very first time you touch the P
the Cell Phone Setup procedure. See page 6 of the Quick-Start Guide included with your
GPS-810 for details.

To Connect to a New Phone

IMPORTANT: The exact connection procedure may vary somewhat among different
Bluetooth-enabled phones. When attempting to connect to a new phone be sure to
follow the screen prompts on both the GPS-810 and the Bluetooth-enabled phone.
1. Turn your Bluetooth-enabled
phone ON and put it in
Pairing (or Discovery) mode.
2. Touch the P button on
HONE
the S screen (see page
OURCE
19). The C P
ELL HONE
(right) appears.
3. Touch the M C
ANAGE ONNECTION
button. The M C
ANAGE
screen (below, right) appears.
4. Touch the C
ONNECT TO A NEW
button. The C
PHONE
P S screen (bottom,
HONE ETUP
right) appears.
5. Place the Bluetooth-enabled
phone into the Pairing mode
(this may require entering a
passkey number, typically "0-
0-0-0").
5. Touch the S
EARCH
and follow any
prompts. When the GPS-810
connects to your phone it will
attempt to import its phone
book. (Phone book compati-
bility varies among different
Bluetooth phones.)
You can now place and receive
calls using your GPS-810.
g u d i e
+ l p y a
GPS-810
™
button the GPS-810 will take you through
H O N E
screen
ONNECTION
ELL
button
screen