Table of Contents
Advertisement
Initial Setup
When you turn your GPS-810 on for the first time, the Setup Wizard will
appear. The Wizard will guide you through the GPS-810's initial setup steps:
1. Touch the button for the
screen language you want to
use (English, French or
Spanish).
Touch the N
button.
EXT
2. Touch the button for the
distance units you want to
use (kilometers/meters, miles/
feet or miles/yards).
Touch the N
button.
EXT
3. Touch the button for the
time zone where you are
located.
Touch the N
button.
EXT
4. Set the current local time.
You can also set the clock
to display either 12-hour or
24-hour time. (Note that
after you initially set the
time, the GPS-810 will auto-
matically update the time
according to the GPS signals
it receives.)
When you touch the N
GPS-810 will display the N
NOTE: Once you complete these initial setup steps, the Setup Wizard will not reappear.
To change any of the GPS-810's settings, see C
g
u
d i
e
+
l p
y a
GPS-810
™
button on the P
EXT
LEASE
screen (see page 9).
AVIGATION
H A N G I N G
S
T
screen, the
ET THE
IME
S
, on page 27.
E T T I N G S
Advertisement
Table of Contents
Troubleshooting
