Table of Contents
Advertisement
USB M
S
ASS
TORAGE
The USB Mass Storage mode lets you transfer files the using drag-and-drop
method on your computer – the same method you use to transfer files from
one folder or drive to another. However, when transferring files in the USB
Mass Storage mode, video files that are in formats not supported by GPS-810
will be transferred without transcoding. These files won't be playable on your
GPS-810 but will take up space on your SD card.
NOTE: You must use the MTP mode to transfer Windows Media Playlists for use in the
GPS-810. See MTP, on page 20.
T
T
F
O
RANSFER
ILES TO THE
1. Insert an SD card into the GPS-810's SD card slot (see page 4).
2. Make sure the USB cable is disconnected from the GPS-810.
3. Set the GPS-810's USB mode to USB M
4. Connect the GPS-810 to your computer's USB hub (see page 21).
5. Launch Windows Explorer (not Internet Explorer) on your computer.
• Find it at Start > Programs > Accessories > Windows Explorer
6. Find the folder with your media in Windows Explorer's left-hand window.
7. Double-click the folder. Its contents will appear in the right-hand window.
8. Drag the files you want to transfer from the right-hand window into the SD
card icon in the left-hand window. (The SD card will appear in the left-
hand window as one of your computer drives.)
6. Double-Click Folder
Containing Media
NOTE: Your Windows Explorer screen may look different from the example.
When you're finished, you can unplug the GPS-810 from your computer and
watch or listen to the files on it. (See Listening to Music, on page 23, and
Watching Videos, on page 24).
g
u
d i
e
+
l p
y a
GPS-810
™
GPS-810
USB M
IN THE
S
ASS
TORAGE
7. Media Folder Contents
Display in Right-Hand Window
8. Drag Files into
SD Card Icon
to Copy
S
M
:
ASS
TORAGE
ODE
(see page 20).
Advertisement
Table of Contents
Troubleshooting
