Ness SecurityGuard III Owner's Manual page 9

RR3 lift battery
open here. out.
universal transmitter (rr2) optional
open here. remove the
cover.
radio micro reed switch (rr3)
oPeRAtion
rr3 radio micro reed switches can be installed on
windows and doors to detect opening.
bAtteRy RePLAcement
carefully lift off the reed switch cover by unclipping
at the bottom using a flat-bladed screwdriver or
* example device
blunt knife.
number
insert a new cr2032 3V lithium battery and then
test the reed switch.
Positive (+) side up.
the new battery must be inserted in the battery clip
with the positive (+) side up.
insert the new
battery. cr2032
3V lithium battery.
oPeRAtion
universal transmitters can be used as window and
door switches (same as radio reed switches) or as a
universal transmitter for other devices as connected
by your installer.
the rr2 also has an onboard vibration analyser with
sensitivity adjustment. this allows optional nessen-
sor™ vibration sensors to provide wireless protection
of door and window frames, works of art, jewellery
cases, safes and other valuables.
bAtteRy RePLAcement
carefully lift off the universal transmitter cover by
unclipping at the bottom using a flat-bladed screw-
* example device
number
driver or blunt knife.
a warning sound will be heard when opening the
case - this is normal.
insert a new high capacity lithium 9V battery and
then test the transmitter.
insert the new
high energy
lithium 9V
battery.
9