radio Key (rK4)
oPeRAtion
rK4 radio Keys have four buttons for operating your
securityGuarD iii.
Press the
lence alarms.
Press the
twice for home mode (if enabled on your system.)
Press the
Press the
grammed by your installer.
bAtteRy RePLAcement
your rK4 radio Keys are sealed units with an ex-
pected battery life of 10 years. low battery warning
* example device
number
might indicate a battery fault or the battery has been
depleted by continuous presses. contact ness or
your sGiii dealer for advice.
radio Keypad (rKP)
oPeRAtion
rKP radio Keypads have a full Pin pad for operat-
ing your securityGuarD iii using 3 to 6 digit user
codes. your installer will set up and program the
rKP to suit.
buttons
used with your user code to arm the system.
used with your user code to arm home mode.
enter button, used when arming and disarming.
used by your installer only.
Lights
Valid: Flashes once when a valid radio signal is
sent to the securityguard.
low Battery: if flashing indicates that the rKP's
internal battery is low. replace the battery.
bAtteRy RePLAcement
carefully open the rKP radio Keypad by pushing
both tabs at the top of the unit using a flat-bladed
* example device
number
screwdriver or blunt knife.
insert a new high energy lithium 9V battery and
then test the sensor.
insert the new high
energy lithium 9V
battery.
6
button to Disarm the system or to si-
button to arm the system or press
button to sound the Panic alarm.
button for auxiliary functions as pro-
sounds the Panic alarm
(Press together)
not used.
.
Need help?
Do you have a question about the SecurityGuard III and is the answer not in the manual?
Questions and answers