Ness 5000 SERIES Installation Manual

NESS 5000 SERIES DIALLER
INSTALLATION MANUAL
This manual is designed to provide the installation instructions on the NESS SECURITY
PRODUCT'S 5000 SERIES Dialler. For complete details on the warranty or the 5000 SERIES
products. please refer to our conditions of sale.
NESS SECURITY PRODUCTS
4/167 Prospect Hwy.
Seven Hills. 2147
N.S.W. Australia
Head Office. SYDNEY
BRISBANE
MELBOURNE Phone: (03) 9878 1022
PERTH
Copyright by NESS SECURITY PRODUCTS, July 1987.
DESIGN CONCEPTS
The 5000 SERIES Dialler is totally unique in that 2 separate
diallers share the one Circuit board and telephone line. It is not simply
one dialler with two Client Account Numbers, but 2 separate, individually
programmable diallers sharing the same hardware.
With this unique design and the many other features built into the
5000 SERIES Dialler, NESS has been able to provide you with a product
capable of meeting the diverse needs of virtually all installations. In
addition, it provides a simple means of overcoming, at no extra cost, the
8 alarm channel limitation of most Central Station equipment. Some of
the unique capabilities of this Dialler are explained below.
EXTRA TELEPHONE NUMBER: The Primary and Secondary telephone
numbers are basically designed for reporting to the Main and Back-up
receivers of a Central Station. An Extra telephone number, which may
be programmed by the client, has been provided for added flexibility. By
setting option 4 of P35E, the Extra number will be used in addition to
the Primary/Secondary numbers. If both options 0 and 4 of P35E are
set, then only the Extra telephone number it used for either or both
Diallers as required.
POCKET PAGER: To indicate an alarm via a 'beeper' type pocket pager,
the Dialler only has to call a number and wait for a special
Acknowledge tone. It does not have to send any alarm reports. This
facility is available via option 5 of P36E.
COMMAND TONE: An optional Tone Generator may be purchased to
remotely control certain aspects of the Dialler (if so programmed).
To use the facility, call the Dialler and when it answers, put the Tone
Generator near the mouthpiece and press its button. The Dialler will
respond with a series of beeps depending on the options selected.
5000 Series Dialler
Phone: (02) 8825 9222
Phone: (07) 3343 7744
Phone: (08) 9328 2511
Page 1