Ness Guardpost Owner's Manual
  1. Manuals
  2. Brands
  3. Ness Manuals
  4. Security System
  5. Guardpost
  6. Owner's manual

Ness Guardpost Owner's Manual

Wireless security system with gsm monitoring
Hide thumbs Also See for Guardpost:
Table of Contents

Advertisement

Quick Links

See also: Installation & Programming Manual , Installation Manual
Guardpost
Wireless security system
With Gsm monitorinG
owner's manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Guardpost and is the answer not in the manual?

Questions and answers

Related Manuals for Ness Guardpost

Summary of Contents for Ness Guardpost

  • Page 1 Guardpost Wireless security system With Gsm monitorinG owner's manual...
  • Page 3 GuArDPost with its "speak easy" technology is a revolutionary radio based state-of-the-art alarm this owner's manual will help you identify the system which has been built to the highest standards various parts of your GuArDPost system of industrial design and manufacturing.

  • Page 4: Operation

    operation By radio Key By radio Keypad Valid Low Battery button system is fully armed +[user code]+ Press once. press home mode (if enabled) By radio Key By radio Keypad Valid Low Battery button system is partially armed +[user code]+ Press twice.
  • Page 5 Press once. emeRgency oveR-Ride Key only to be used if your remote radio Keys are lost. insert key and turn anti- clockwise to disable the Guardpost. (store these keys in safe, hidden place). GuArDPost GuArDPost PoWer oFF...

  • Page 6: Battery Replacement

    Keypad (rKP) oPeRAtion rKP radio Keypads have a full Pin pad for operating your Guardpost using 3 to 6 digit user codes. your installer will set up and program the rKP to suit. buttons used with your user code to arm the system.
  • Page 7 Battery LoW mAin bAtteRy (battery Powered systems) your Guardpost main battery will provide 3-4 month's operation before it must be recharged. When the "low main Battry" message is displayed you must charge the main battery. Plug the charger into a mains power outlet and plug the charging connector into the Guardpost for 24 hours.
  • Page 8 Door Bell (rDB) oPeRAtion Press the Door Bell button to sound the door chime at the Guardpost main unit. bAtteRy RePLAcement carefully lift off the rDB Door Bell unit's cover by unclipping at the bottom using a flat-bladed screw-...
  • Page 9 radio reed switch (rr3) oPeRAtion rr3 radio reed switches can be installed on win- dows and doors to detect opening. bAtteRy RePLAcement carefully lift off the reed switch cover by unclipping at the bottom using a flat-bladed screwdriver or * example device blunt knife.
  • Page 10 2 seconds. if you hold the test button for longer than 10 seconds it will also send an alarm signal to the Guardpost. bAtteRy RePLAcement remove the detector from its base by twisting anti- clockwise.

  • Page 11: Back-To-Base Monitoring

    Back-to-Base monitoring gsm diALLeR your Guardpost has a Gsm Dialler which need any maintenance but should be communicates with your monitoring station tested when you perform your regular using the Gsm mobile telephone network. this system test. means you don't need a telephone landline for Gsm monitoring needs an active mobile monitoring.

  • Page 12: Battery Specifications

    All rights reserved. no part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of ness. ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of ongoing product development and improvement.

Table of Contents