Mira Sport Thermostatic 9.0 Installation & User Manual page 13

10.
Connect supply pipe.
Do not overtighten!
12.
Firmly connect the conductors. Do
not exert strain on the terminal
block.
14.
Refit the Service Tunnel and Cover.
Make sure they fit correctly.
Do not overtighten screws.
11.
Feed cable into Case. Fit Earth
sleeve (not supplied) and strip
insulation.
Do not twist cable cores.
13.
L = BROWN
E = GREEN
N = BLUE
Make sure wires are clear of all
mounting holes.
15.
Do not use alternative screws to
secure the Cover. This can cause
internal damage to the appliance.
Do not seal around the back of
appliance.
13
Important! Make sure
that the inlet earth wire is
routed as shown. Failure
to do so may cause
product malfunction.