Installation - Mira Sport Thermostatic 9.0 Installation & User Manual

Read the section "Important Safety Information" first.
1.
Electrical supply is turned
off at the mains.
4.
R e m o v e C o v e r a n d
determine supply pipe
position.
7.

INSTALLATION

TEMPLATE
Mira Sport
Attention Installer
Drill and plug* the three
holes using template.
* Alternative fixings for some wall structures are not supplied.
INSTALLATION
2.
200 mm
200 mm minimum gap
from ceiling.
5.
For back inlet use soldered
elbow.
Do not trap green wire.
8.
Fix appliance to wall.
12
3.
Remove three screws.
6.
Caution! Do not drill into
buried cables or pipes.
9.
Flush a minimum of 10
litres through pipework.