Utility Settings; Basic Operation; Utility Parameters - Yamaha KX25 Owner's Manual

Utility Settings

Utility Settings
In the Utility display, you can make various settings such as the Arpeggio tempo, MIDI transmit/receive
settings, and display related settings.

Basic Operation

1.
Press the [UTILITY] button.
The LED lamp above the button lights and the
Utility display appears.
2.
Use the SELECT buttons to select the
parameter to be edited.
For details about parameters, refer to "Utility
Parameters" listed below.

Utility Parameters

Display
Tempo
Sync
Clock
VeloCurve
34
Initial
Range
Value
10–300 120
Auto, Internal, External Auto
Off, On On
Soft2, Soft1, Normal,
Normal
Hard1, Hard2, Fix
Owner's Manual
3.
Use the DATA [INC] and [DEC] buttons to
change the value.
NOTE
If selecting "BulkTransmit" or "FactorySet",
you can execute each of these functions by
pressing the DATA [INC] button.
4.
After setting, press the [ENTER] button to
return to the Utility Top display.
The settings you made here will be stored
automatically without the special operation. The
settings will be maintained until executing the
Factory Set operation.
Description
Determines the tempo (BPM) of the Arpeggio playback. The
Arpeggio will play according to the speed of the MIDI clocks
transmitted from an external device or computer when the
Sync parameter is set to "Auto" (only when the MIDI clock is
transmitted continuously) or "External."
Determines the tempo source transmitting the MIDI clocks
which the Arpeggio playback follows.
Auto............ When MIDI clock is transmitted continuously
from an external MIDI device or computer, the
internal clock of the KX is not effective and the
Arpeggio playback is synchronized with the
external clock. When MIDI clock is not
transmitted from the external MIDI device or
computer, the internal clock of the KX is effective
meaning that the Tempo value set on the KX is
available.
Internal ....... The Arpeggio will play with the Tempo value set
on the KX.
External ...... The Arpeggio will play according to the speed of
the MIDI clocks transmitted from an external
device or computer. When the KX does not
receive the MIDI clocks, the Arpeggio does not
play.
Determines whether the tempo clock of the Arpeggio
playback is output as a MIDI message.
On .............. When this is selected, MIDI clocks will be
transmitted.
Off .............. When this is selected, MIDI clocks will not be
transmitted.
Determines the Velocity Curve. For information about each
value, see page 27.