Utility Settings; Basic Operation; Utility Parameters - Yamaha KX25 Owner's Manual

Utility Settings

Utility Settings
In the Utility display, you can make various settings such as the Arpeggio tempo, MIDI transmit/receive
settings, and display related settings.

Basic Operation

1.
Press the [UTILITY] button.
The LED lamp above the button lights and the
Utility display appears.
2.
Use the SELECT buttons to select the
parameter to be edited.
For details on the parameters, refer to "Utility
Parameters" listed below.

Utility Parameters

Display
Tempo
Sync
Clock
VeloCurve
VeloFix
36
Initial
Range
Value
10–300 120
Auto, Internal, External Auto
Off, On On
Soft2, Soft1, Normal,
Normal
Hard1, Hard2, Fix
1–127 100
Owner's Manual
3.
Use the DATA [INC] and [DEC] buttons to
change the value.
For the Bulk Transmit and Factory Set
NOTE
parameters, you can execute these
operations by simply pressing the DATA
[INC] button.
4.
After making the desired settings, press the
[ENTER] button to return to the Utility Top
display.
The settings you made here will be stored
automatically without the special operation. The
settings will be maintained until executing the
Factory Set operation.
Description
Determines the tempo (BPM) of Arpeggio playback. The Arpeggio
will play according to the speed of the MIDI clock transmitted
from an external device or computer when the Sync parameter is
set to "Auto" (only when MIDI clock is transmitted continuously) or
"External."
Determines the tempo source transmitting the MIDI clock to which
Arpeggio playback is synchronized.
Auto......... When MIDI clock is transmitted continuously from an
external MIDI device or computer, the internal clock of
the KX is not effective and Arpeggio playback is
synchronized with the external clock. When MIDI clock
is not transmitted from the external MIDI device or
computer, the internal clock of the KX is effective
meaning that the Tempo value set on the KX is
available.
Internal .... The Arpeggio will play with the Tempo value set on the
KX.
External ... The Arpeggio will play according to the speed of the
MIDI clock transmitted from an external device or
computer. When the KX does not receive MIDI clock,
the Arpeggio does not play.
Determines whether the tempo clock of Arpeggio playback is
output as a MIDI message.
On ........... When this is selected, MIDI clock will be transmitted
while an Arpeggio plays back with the tempo specified
on the Tempo parameter above.
Off ........... When this is selected, MIDI clock will not be
transmitted.
Determines the Velocity Curve. For information about each value,
see page 27.
Determines the velocity value when the VelCurve is set to "Fix."