For Windows - Yamaha KX25 Owner's Manual

Setting Up

For Windows:

1.
Make sure that the power to the KX is turned
off.
2.
Disconnect all MIDI cables that connect MIDI
devices to MIDI IN/OUT connectors on the
KX.
3.
After disconnecting all other USB devices
from the computer, connect the KX directly
to the computer (without using a hub) by
using a USB cable.
4.
Start the computer and log on to the
Administrator account.
5.
Insert the "TOOLS for KX DVD-ROM" into
the DVD-ROM drive.
6.
Open the "Extensions for Steinberg DAW"
folder in the DVD-ROM, then double-click
the file "setup.exe"
The first display for installing "Extensions for
Steinberg DAW" appears.
7.
Click [Next] to call up the "Welcome to the
InstallShield Wizard for Yamaha Extensions
for Steinberg DAW" window.
NOTE
· If the same version of Extensions for
Steinberg DAW has already been
installed in your computer, the completion
of the maintenance window appears. In
this case, click [Finish].
· If a newer version of Extensions for
Steinberg DAW has already been
installed in your computer, a dialog box
appears indicating that the newer
software has already been installed. In
this case, you do not need to install the
software. Click [OK] in the dialog box.
· If an older version of Extensions for
Steinberg DAW has been installed in your
computer, the software should be
updated. (The procedure is the same as
for installing it from scratch.)
8.
Click [Next] to start the installation.
To cancel the installation procedure, click
[Cancel].
NOTE
During the installation procedure, you can
select the type of "Extensions for Steinberg
DAW" by selecting "Custom" in the "Setup
Type" dialog.
9.
When the installation is complete, a
message indicating that installation is
complete appears. Click [Finish].
10.
Turn the power on of the KX by pressing the
[STANDBY/ON] switch.
The KX will be recognized by the connected
computer.
14
11.
The installation has been completed.
Owner's Manual
Install the USB-MIDI driver.
NOTE
Installation of the USB MIDI driver is
described in "installationguide_**.pdf" stored
in the "USB-MIDI_Driver" folder.