Martin MiniMAC Maestro User Manual page 47

Problem
No light.
Lamp cuts out intermittently or
burns out too quickly.
S t E
(memory error)
message displayed
P A E
(pan error time-out)
message displayed
T I E
(tilt error time-out)
message displayed
C S E
(check-sum error)
message displayed
Shaky movement during
combined pan/tilt movement
Probable cause(s)
Lamp missing or blown.
Shutter may be closed.
Fixture is too hot.
Incorrect power supply setting. Check setting.
Fans or air vents may be
blocked.
The user settings cannot be
read from memory.
Pan reset switch malfunction.
Tilt reset switch malfunction.
Unsuccessful software upload. See "Installing software".
Movement occurs at a
resonant velocity.
Controller has poor DMX
tracking.
Troubleshooting
Remedy
Disconnect fixture and replace
lamp.
Open the shutter.
Allow fixture to cool.
Clear/clean air vents and fan.
Contact service technician.
Contact service technician.
Contact service technician.
Make small adjustment to fade
path or fade time.
Use the speed channel and
avoid controller fading.
47