Cutting Unit; Lift Lever For Cutting Unit - Husqvarna ProFlex 18 Operator's Manual

Cutting unit

Rider ProFlex can be equipped with numerous
attachments.
The BioClip unit finely cuts the lawn by cutting the
grass several times before returning the clippings to
the lawn as fertiliser.
Cutting unit with rear ejection, i.e. the grass cuttings
are ejected behind the unit.
The Combi unit functions as a BioClip unit when a
BioClip plug is fitted, but can be reset to rear
ejection by removing the BioClip plug.
For identification of the cutting unit, see
"Maintenance \ Cutting unit models".

Lift lever for cutting unit

The lift lever is used to set the cutting unit in
transport or mowing position. In transport position
the blade brake is activated automatically to stop
the blades within around 5 seconds.
1. Pull back the lever to the locked position for
transport.
The cutting unit will lift up and the blades stop
rotating.
2. Press in the lock button and move the lever
forwards for the mowing position.
The unit will lower down and the blades start to
rotate.
3. The lever can also be used to temporarily
regulate the cutting height, e.g. for a small
mound in the lawn.
PRESENTATION
Examples of the accessories for Rider ProFlex:
• Brush
• Snow plough
• Wheel weights
• Snow chains
• Dozer
• Edger
• Electric attachment lift
• BioClip cutting unit
• Gravel rake
• Trailer
Lifting of the cutting unit
Lowering of the cutting unit
6004-209
6004-210
13
English –