Assembling The Belts - Husqvarna ProFlex 18 Operator's Manual

Assembling the belt
1. Position the belt from the front and let the front
end of the belt hang around the hook guard's
handle.
2. Fit the belt on the intermediate pulley and
against the support wheel.
3. Fit the steering plate under the support wheel
and tighten the bolts using two 13 mm
spanners.
4. Hook on the spring for the blade brake.
The method of fitting the belt over the front pulley is
described in steps 6–7 under "Fitting the cutting
unit".
40
– English
MAINTENANCE
8009-009
6016-114
8009-005