Bandwidth Control - NETGEAR R6300v2 User Manual

Bandwidth Control

Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
router to the Internet.
To set the maximum uplink bandwidth:

1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. Enter www.routerlogin.net or www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > QoS Setup.
The QoS Setup screen displays:
5. Select the Turn Internet Access QoS On check box.
6. Specify the maximum uplink bandwidth for your Internet connection:
• If you know what your uplink bandwidth is, type it in the Uplink bandwidth Maximum
field and select either Kbps or Mbps from the drop-down list.
• If you are not sure, click the Speed Test button.
Speedtest verifies the upstream speed of your Internet connection. The Uplink
bandwidth Maximum field displays the result of the test.
7. Click the Apply button.
Your changes are saved.
R6300v2 Smart WiFi Router
NETGEAR genie ADVANCED Home
44