Manage Usb Print And Scan Jobs - NETGEAR R6300v2 User Manual

2. Select Tools > Configuration.
3. Specify the following settings:
• Automatically execute when logging on Windows. Enable this utility to start
automatically when you are logged in to Windows.
• Timeout. Specify the time-out value for holding the USB resource when it is not in
use.
• Language. Select the display language for this utility.
4. Click OK.
Your changes are saved.

Manage USB Print and Scan Jobs

The NETGEAR USB Control Center utility runs in the background on each computer in your
network. This utility manages the printing queue and handling for the USB printer connected
to your router.
After you activate the utility on each computer in the network, the status of the USB printer is
Available on all of the computers.
• When the status is Available, you can use the USB printer from any computer in the
network. The utility on each computer automatically manages the printing queue and
handling. The status of the USB printer appears as Available on all of the computers
when no print jobs are in process.
• When the status is Manually connected by xxx, only the xxx computer can use the printer.
Other network devices must wait until the xxx computer has released the connection, or
until the connection times out (the default time-out value is 30 seconds).
You can click the Disconnect button at any time to release the connection.
R6300v2 Smart WiFi Router
ReadySHARE Printer
68