Setting Up Screen Call - Sanyo Katana Eclipse User Manual

Setting Up Screen Call

You can screen incoming calls by using a recorded
announcement, either a pre-recorded one or one that you
record. You can also record the caller's message.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press
softkey) > Screen Call.
To set auto Screen Call:
1. Select
2. Set the answer delay by using numeric keys or by pressing
the navigation key up or down.
3. Press . The
Tip: While the caller's message is being recorded, press
or press to stop recording and disconnect the call.
Selecting an Announcement for Screen Call
1. Select
2. Depending on your preference, select Pre-Recorded or
Custom.
Recording Name for a Pre-Recorded Announcement
1. Select
2. Highlight Pre-Recorded and press
Record Name.
If your name has already been recorded, select Yes or
No for overwriting.
3. Press to start the 1st recording. (The maximum
recording time is 12 seconds.)
4. Press to stop recording.
5. After the 1st recording, press
recording.
> Tools > Voice Memo > Screen Call > Auto > On.
icon is displayed on the screen.
>Tools > Voice Memo > Screen Call > Announcement.
> Tools > Voice Memo > Screen Call > Announcement.
Options
to answer the call,
(right softkey) >
Edit
again to start the 2nd
(right
99