Sanyo Katana Eclipse User Manual page 18

Answering Calls
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press
To answer an incoming call with the phone closed:
When your phone rings or vibrates, press and hold the
volume key on the left side of the phone. (The call will be
answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Your phone notifies you of incoming calls in the following
ways:
The phone rings and/or vibrates.
The illumination flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts, the Contacts
entry's name is displayed.
The following options are also displayed by pressing
(right softkey).
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Select Audio to switch the call to your desired device
(if available).
Answer on Hold to put the call on hold. (See "Setting Answer
on Hold" on the next page.)
Screen Call to answer the call by using pre-recorded
announcement. (See "Setting Up Screen Call" on page 99.)
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Ignore with Text to ignore the call and send a text message to
the caller (if available).
14
or to answer an incoming call.
Options