Damper Oil Change; Damper Oil Change - Honda CRF450R 2006 Owner's Manual

Front Suspension Adjustments
22.Apply pressure to the fork damper and insert a
special tool or mechanic's stopper tool (29)
(see below) between the axle holder (27) and
lock nut (30).
23.Hold the lock nut and remove the fork center
bolt (28) from the fork damper.
NOTICE
Do not remove the lock nut from the fork damper
piston rod. If the lock nut is removed, the piston
rod will fall in the fork damper and you cannot
reassemble the fork damper.
(29)
(27)
(30) (28)
(27) axle holder (29) stopper tool
(28) fork center bolt (30) lock nut
24.Remove the push rod (31) from the fork
damper.
25.Remove the special tool or mechanic's stopper
tool (29) between the axle holder (27) and
lock nut (30) while applying pressure to the
fork cap.
NOTICE
Be careful not to damage the lock nut and fork
center bolt hole.
102
Adjustments for Competition
(27) axle holder (30) lock nut
(29) stopper tool (31) push rod
26.Remove the fork damper assembly (32) from
the fork assembly (33).
Remove the fork from the vise.
Remove the fork spring (34) from the fork.
(32)
(34)
(33)
(32) fork damper assembly (34) spring
(33) fork assembly

Damper Oil Change

(27)
(29)
1. Set the fork damper (1) in a vise with a piece
of wood or soft jaws to avoid damage.
2. Loosen the fork cap assembly (2) while
(30)
holding the fork damper (1) using the lock nut
wrench (3).
(31)
(1) fork cap
(2) fork damper
(2)
(1)
(3)
(3) lock nut wrench