Honda CRF450R 2006 Owner's Manual page 37

2. Tighten the screw (4) on the air cleaner
connecting tube clamp (5).
3. Hook the air cleaner case cover (6).
4. Install and hook the fuel tank band (7).
5. Connect the crankcase breather tube (8).
(5)
(4)
(4) screw
(5) air cleaner connecting tube clamp
(6) air cleaner case cover
(7) fuel tank band
(8) crankcase breather tube
6. Remove the old gasket from exhaust pipe.
7. Install the muffler clamp (9) and new gasket
(10) to the exhaust pipe.
(10)
(9)
(9) muffler clamp (10) gasket
8. Install the muffler (11).
9. Install the muffler clamp (12) by aligning the
tab (13) of the muffler clamp with the cut-out
(14) of the muffler.
(6)
(7)
(8)
(11) muffler
(12) muffler clamp
10. Tighten the muffler B bolt/washers (15) and
muffler A bolt (16) to the specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
11. Tighten the muffler clamp bolt (17) to the
specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
(15)
(15) muffler B bolt/washers
(16) muffler A bolt
(17) muffler clamp bolt
(11)
(12)
(14)
(13)
(13) tub
(14) cut-out
(16)
(17)
Subframe Removal
12. Install the side covers (18), side cover bolts
(19).
13. Install the seat (page 29).
(18)
(18) side covers
(19) side cover bolts
Servicing Your Honda
(19)
33