Controls - Maserati Quattroporte Automatic Owner's Manual

M139_UM_ing.book Page 77 Friday, September 5, 2008 8:19 AM

Controls

MODE
The screen page activation and setting
is controlled by pressing the MODE (J),
"+" (K) and "-" (L) buttons.
Pressing the MODE button briefly will
switch to the following screens in
sequence:
– Trip A
– Trip B
– Tyre pressure
– Left-hand front seat comfort (*)
– Right-hand front seat comforto (*)
– Option Selection
– RPM indicator
– Standard.
(*) if the vehicle is equipped with
"Comfort Pack" or "Winter Pack".
Each of these has a 10-second timing,
after which the non-flashing
information previously viewed is
restored.
Pressing the MODE button at length
(over 2 seconds) the user will select the
Trip Odometer information currently
displayed, or the Trip Odometer A if
the tachometric repetition is active.
This piece of information will flash for
10 seconds, after which the non-
flashing information previously
viewed is restored.
K
J L
"+ " and "-"
By means of the "+ "(K) and "-" (L)
buttons, the user can adjust the
instrument panel brightness.
When the "Option Selection" screen
page is viewed, these buttons can be
used to select, choosing between Trip
Odometer A and Trip Odometer B, the
information to be repeated on the
display. In fact, by selecting , Odo A or
Odo B, with the MODE (J) button and
then pressing buttons "+ " and "-", the
user will display the trip information
selected (flashing) alternately.
Trip Odometer reset
In all these cases, and before the 10
seconds are up, pressing the MODE (J)
button briefly (less than 2 seconds) will
result in the trip information relating
to the flashing Odometer (A or B)
being reset.
Setting the date
The date can be set by means of the set
up menu of the Multi Media System
(see Multi Media System Manual).
Instruments and gauges
3
77