Maserati Quattroporte Automatic Owner's Manual page 193

M139_UM_ing.book Page 193 Friday, September 5, 2008 8:19 AM
– Remove the cap P from power socket
positioned in the luggage
compartment or remove the
cigarette lighter Q from one of the
power sockets housed in the ashtray,
then fit the coupling M.
– Turn the ignition key to MAR to
supply power to the plug and
activate the compressor by pressing
switch O.
– Stop the compressor when the
pressure gauge L indicates 2.2 bar
(220 kPa – 31.9 psi) and screw on the
cap on the valve.
P
WARNING: We recommend that you
check the tyre pressure on the gauge
when the compressor is off, in order to
have a more accurate reading.
WARNING: Do not activate the
compressor for over 20 minutes: risk of
overheating! The compressor has been
designed for inflating the spare wheel
only; do not use it to inflate
mattresses, rubber boats etc.
Q
Q
WARNING: The current plug is
powered only when the key is turned
to MAR and it can only be connected
to devices with a power absorption of
15A maximum (180W power). Do not
connect devices with a higher power
absorption to the current plug. A
prolonged power absorption can
discharge the battery, preventing the
engine from being started once again.
– Fit the bushing J onto the wrench I
and slacken the 5 fastening studs on
the wheel to be replaced by about
one turn.
If a tyre gets a puncture
6
193