Table of Contents
Advertisement
Carephone 52+
12.3
Opening the unit
You must open the unit in order to gain access to the program-
ming panel:
12.4
Key functions during programming
C
Save new settings.
Settings that are not confirmed with the C key will not be saved!
Save the entered settings and go to the next programming step
A
The setting entered for the programming step is deleted
*
Return to the beginning of the programming mode
**
End programming
Programming also ends automatically if no entries are made
for more than 10 minutes. The unit announces: Setup ended
0 to 9
Enter the programming data
P
The unit announces the program step's current content
R
Cancels programming, saved data is not lost
Switch off backup battery
P+R
Reset factory defaults
Table 12.1
Bosch Security Systems
Operating Manual
Programming | en 29
F.01U.031.884 V4 | 2009.03
Advertisement
Table of Contents
