Bosch Carephone 52+ Operating Manual page 37

Carephone 52+
61 Incoming call recognition
Incoming phone calls can be accepted by the Carephone 52+
and the call can be conducted with the hands-free feature.
The call can be accepted and terminated using the emergency
call button. A call can also be taken using the radio button if it
is programmed for emergency call initiation. The call tone on
the Carephone 52+ can be switched on or off and the volume
can be adjusted. You can program:
62 Volume
This step is used to program the default volume as well as
the soft and loud settings.
Default volume: This is the volume at which the centre com-
municates via the Carephone 52+.
Soft setting: Low volume, is adjusted by the centre during
a call.
Loud setting: High volume, is adjusted by the centre during
a call.
Use settings 1 to 8 to program
1.
2.
3.
70 Test call interval
This step is used to program the interval between automatic
test calls from the Carephone 52+ to the social alarm call cen-
tre in days. Select a setting between 0 and 28 days.
0 = Off
Table 12.2
Bosch Security Systems
0 = Off
1 = Carephone 52+ registers call with call tone
2 = Carephone 52+ registers call with loud call tone
3 = Carephone 52+ registers call with soft call tone
4 = Carephone 52+ registers call with no call tone (the
phone rings)
the basic volume, e.g. 4
the loud setting, e.g. 6
the quiet setting, e.g. 2
Operating Manual
Programming | en 37
F.01U.031.884 V4 | 2009.03