Bosch Carephone 52+ Operating Manual page 21

Carephone 52+
Error messages
What the Carephone 52+
says
Power failure
Power failure ended
Unit battery empty
Line failure
Transmission failure
Error zero-one
Failure two-X:
Failure three-X:
Table 10.5
Bosch Security Systems
Meaning
Power failure. The indicator lamp in the activity
monitor reset button flashes.
Check the power connection of the Carephone
52+.
When power is restored
The Carephone 52+ backup battery no longer has
its full capacity. Contact the social alarm call
centre or customer service.
The connection to the telephone network has
been lost. Check the plug on the unit and the
telephone jack.
An activated emergency call cannot be sent
despite 15 repeated dialling attempts.
Press the S-button to stop the error message
announcement. Contact the social alarm moni-
toring centre provider or customer service.
External signal detected
The indicator lamp in the activity monitor reset
button continues to flash until the message has
reached the centre.
Transmitter battery empty
(X is the transmitter number)
Radio transmission monitoring faulty. The indica-
tor lamp in the activity monitor reset button con-
tinues to flash until the message has reached the
centre.
(X is the transmitter number)
Operating Manual
Device Acknowledgements | en 21
F.01U.031.884 V4 | 2009.03