Brother Print Server Network User's Manual page 87

Press OK.
d
Press a or b to select TCP/IP.
Press OK.
e
Press a or b to select IP Address.
Press OK.
f
Enter the IP address.
Press OK.
g
Press Stop/Exit.
Subnet Mask
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
(For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
d
Press a or b to select TCP/IP.
Press OK.
e
Press a or b to select Subnet Mask.
Press OK.
f
Enter the Subnet Mask address.
Press OK.
g
Press Stop/Exit.
Gateway
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
(For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
Control panel setup
6
6
6
81