Brother Print Server Network User's Manual page 43

Note
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the
machine and the access point are within range for wireless communication. Then, click Refresh.
• "SETUP" is the default SSID of the machine. Do not choose this SSID.
p
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to r.
q
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Wireless Configuration for Windows
®
4
37