Care And Cleaning - Fisher & Paykel OR90SDBGFX Series Installation Instructions And User Manual

Care and cleaning

41
Cleaning the inside of your oven
Do not use oven cleaner on catalytic panels. Remove the catalytic panels if additional oven cavity
cleaning is required. See 'Fitting and removing catalytic panels'
Do not use abrasive cleaners, cloths or pads to clean the enamel.
To make cleaning easier, you can remove the side racks, the oven door, and the fat filter.
Fig. 37 Removing the side racks
Drop-down grill element
To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element
fixing screws.
When you have finished cleaning the oven ceiling, raise the grill element and screw the element
fixing screws back onto the studs. Make sure that the fixing screws are tightened and the
element is held securely in place.
The grill element itself is self-cleaning.
Fixing screw
Stud
Fig.38 Drop-down grill element