Reversal Of Compressor Rotation - Quincy Compressor QR-25 Series Instruction Manual

Hide thumbs Also See for QR-25 Series:
Table of Contents

Advertisement

-.. -.—
,——.
~
.———
.... .
—.
Reversal of Compressor
Rotation
Pressure lubricated
QR-25 series compressors
can be modified to operate in
reverse rotation with exception to the Models 206 & 210.
These two models
PLx 1068
Fig. 5-4
Compressor
Directional
&rows
operate in the counterclockwise
direction only.
To reverse the operating direction of a pressure lubricated
compressor,
perform the following steps:
Step 1) Remove:
- the control tubing from the hydraulic
unloader and pilot valve (if so
equipped).
- the oil pressure gauge and hydraulic
unloader.
- the pilot mounting
stud set screw and pilot valve assembly.
- the oil filter" (turn counterclockwise).
- six (6) oil pump housing bolts.
Step 2) Rotate the oil pump housing l/. turn (1800). (Note: The rotational
arrow at the top of the pump "housing should now reference
the
direction
you wish the compressor
to rotate.
(See
Fig. 5-4,
Compressor
Directional
Arrows)
Step 3)
Re-install
the six (6) housing bolts and torque them in a star or
cross pattern to six (6) ft.-lbs.
Step 4)
Remove the countersunk
pipe plug* from the oil pump housing and
relocate it in the opposite (bottom) hole. (SeeFig. 5-5, Relocating
Countersunk
Pipe Plug)
Failure to relocate this pipe plug will result in complete
loss of oil flow
throughout
the compressor.
Compressor
seizure will result and warranty will
be void. The countersunk
pipe plug must always be relocated in the bottom port
position.
d
Step 5) Install a new oil filter*. Tighten the filterl/O turn after initial gasket
.
contact,
Step 6) Re-assemble
the control components
in reverse order,
Step 7)
Step 8)
I
Rx 1154
Fig. 5-5 Relocating
Countersunk
Pipe Plug
Step 9)
*Not applicable to models without oil pumps.
Double check the directional
arrows.
For aircooled models only, remove the standard compressor sheave
and replace with a reverse rotation
sheave available
from your
local Quincy Compressor
Distributor.
Start the compressor
and adjust the oil pressure.
QR-25
Series
QUINCY COMPRESSOR
52201-104
23
Februarv
1994

Advertisement

Table of Contents
loading

Table of Contents